STEEL SWAGE U-CHANNEL
FORMING BLOCK & HAMMER PUNCHES
SWAGE FORMING & SHAPING TOOL
A tool steel Swage Block with 1/2 round U-Channels/Grooves and a 90° V-Groove on the bottom of the block. The hardened tool Steel swage has 6 half round channels used for forming, along with a 90° V-groove on the bottom side for bending.
The punches are like hammers each one is made to use with the matching grooves of the block. Swage come with 6 hammer- punches which correspond to the grooves of the swage block.
A very well made forming and shaping tool, with a good finish, channels are smooth and polished.
SPECIFICATIONS: JETS Product # 0407-29776
- Punch Diameters: 8.3mm - 10.3mm - 13.8mm - 17.1mm - 20.4mm - 23.3mm
- Block Dimensions: 62.mm x 165mm x 23.5mm - 2-7/16" x 6-1/2" 15/16"
- Weight: Block & Punches 4.6 Pounds - 2.1Kg