Product Description
Free Shipping
Handle with holder is for holding graphite stirring rods, when melting metals by torch or gas, when casting or melting with electric furnaces and melters. No need to hold on to the stirring rod as it warms up and gets hotter with usage. Holder portion is designed at 60° Degree Angle allowing the user comfort and ease while mixing the hot molten metal. Holder is made of steel and comes with a wooden handle. The overall length of the holder is 16".
Holder has a Capacity to hold from 5/16" to 1/2" rods. The stirring rods are easily tightened and held at the desired position and length with the thumbscrew.
Specifications: JETS KIT # 0311-011314
- Holding Capacity: 5/16" to 1/2" - 8mm to 12.8mm
- Overall Length: 16" - 410mm
- Handle: Wood #5 Size 5"- 130mm
Carbon Rods to Mix & Stir your precious metals, scrap metals while melting; graphite is also used to remove any impurities on the surface of the molten metal much like a skimmer. The carbon rod is used when melting Gold & Silver metals with Torch, in Gas or Electric Melting Furnaces. Rods are used for stirring the molten metal in order to get a good homogenous mix of the alloys in Gold and Silver...
Carbon stirring rods are made of high density fine grain graphite. DO NOT use for Platinum, Graphite will contaminate your metal.
Rods Dimensions: JETS Product # 0311-114 & 0311-113
- 1/2" - 12.66mm Diameter x 12" - 340mm Long
- 3/8" - 9.55mm Diameter x 12" - 340mm Long
