Product Description
SOLUTION FOR ULTRASONIC CLEANER
"BORDEAUX RED" 4 OZ. SIZE BOTTLE
JEWELRY BUFFING COMPOUND CLEANING SOLUTION FOR ULTRASONIC UNITS
This effective jewelry cleaning solution removes dirt, grime and tarnish from precious metals and gemstones.
The Bordeaux red liquid works using ultrasonic waves to deeply penetrate crevices and surfaces for a thorough clean.
It safely cleans without damaging even delicate designs or stones.
After just a few minutes in an ultrasonic jewelry cleaner, pieces will emerge sparkling as good as new.
Whether used for everyday maintenance or heavy restoration projects, this concentrated formula effortlessly cuts through years of buildup left by environmental elements, lotions and cosmetics.
Jewelers, retailers and customers alike trust it to restore treasures to their original brilliance while preserving precious metals. For the best results, use as directed with an ultrasonic cleaner.
Bordeaux Red is a specially formulated solution - it is a HIGH Concentrate liquid, it's a widely used solution by professionals in Jewelry Manufacturing in their Polishing Department as well as Jewelry Retail Stores and Repair shops.
The formulation of this solution will break down and remove grime accumulations from metals, and clean and brighten stones on the jewelry leaving a High Gleam.
Bordeaux Red is a mildly alkaline liquid cleaner for the removal of soils such as grease, oils, drawing compounds, lubricants, and buffing compounds such as gray star, white diamond, Tripoli Rouge, lime, etc.,
From precious metals and semi-precious metals such as rhodium, platinum copper, brass, and precious stones without the use of ammonia or other harsh chemicals.
The solution is for use in agitated tanks or ultrasonic applications.
JETS Product # 2110-404 by JTS Made in USA
DIRECTIONS: MIX WITH WATER - CONCENTRATIONS: 5-10% BY VOLUME - TEMP: 120-140°F - TIME: VARIABLE
THE EXACT CONCENTRATION WILL DEPEND UPON THE EXTENT OF THE BUILD-UP AND AGE OF THE BUFFING OR POLISHING COMPOUND.
ULTRASONIC APPLICATIONS: SET THE TRANSDUCERS TO THE OPTIMUM EFFICIENCY AND DEGAS THOROUGHLY.
WHEN UNIFORM CAVITATION IS ACHIEVED, “RED” IS READY FOR USE, CLEAN PARTS FOR 15 SECONDS TO 5 MINUTES DEPENDING ON THE SOIL CONDITIONS.
RINSE CLEANED PARTS WITH WATER AND OR USE A STEAMER TO REMOVE ANY RESIDUE FULLY
