Product Description
Free Shipping
The Brown Tripoli is formulated for fast cutting, it’s composition is made for removing lines and marks on surfaces, recommended to remove and eliminate scratches and imperfections.
Brown Tripoli compound works on all metals as well as plastics. Tripoli is a good cutting compound especially for aluminum, brass, copper, zinc, plastics and composites.
NOTE: We have included polishing recommendations at the bottom of this page, to assist you.
- Utilizes Quality Grade Abrasives
- Combined with Additives
- Long Lasting Composition
- Good Adhesion to Buffing Wheels
- Produces - Fast Cutting
Specifications: JETS Product # 1614-20301
- Size is approximately: 2-1/2" Long x 3/4"
- Bar Weight: 1 oz. + (Slightly More)
Note: Compound is used with a buffer, motor or rotary tool and is applied directly to the surface edge of the buff wheel. The rotation of the buff will create friction and the heat generated will dress the buff with the compound and will be ready to polish the parts.
SALE IS FOR 1 BAR
POLISHING RECOMMENDATIONS:
- Our recommendations and suggestions on Buffing to obtain the best results possible:
- Use the right compound for the metal that you are trying to polish
- It may be needed to go through 2 or 3 steps, in polishing to get the optimum result you are looking to achieve.
- Make sure that the parts that are being polished are smooth and clean, use the appropriate abrasive to remove lines and scratches.
- Avoid using different compounds with the same buff, if you have to then make sure to clean and remove any hardened compound residue on the surface edge with a buff rake.
- Segregate your buffs for the various metals, Gold, Silver, Brass … try not to use the same buff for all metals. If you have to then make sure buffs are cleaned (dressed) with a buff rake.
- A clean buffing wheel edge is important.
- Allow the buff and compound to perform the work they were made and formulated for, excessive force or pressure will hurt the process.
- Whenever you are working with Platinum never use a buff that was used for another type of metal.
WORK SAFE! Working with rotary motors and wheels can be dangerous if proper safety procedures are not followed.
PROTECTION - Protect yourself, your fingers and hands, your face and eyes and use respirators.
