Product Description
Free Shipping
All Purpose Jewelry Injection Wax suited for a wide variety of applications: Rings, Charms, Pendants components. This injection wax is an all-purpose wax, highly fluid when melted for easy injection and release even with the most intricate molds. Consistently reproduce your molds with perfect results. Melt at 150ºF (66ºC).
Freeman injection wax is compounded from the purest virgin waxes & resins, Freeman injection wax offers good performance and consistent quality.
Technical Information:
To obtain optimum results, you should "tweak" the wax temperature one degree at a time, bringing it down to the coolest injection temperature possible. Be sure to allow at least one hour soak time between tests to permit the wax to fully stabilize at the new temperature setting.
Always inject molds at the lowest possible pressure setting (typical injection pressures range from 2-10 PSI). This will eliminate or minimize flashing and mold lines, greatly reduce clean up time, and will ensure similar pieces are the same weight. Other savings include reduced metal loss and faster finishing.
Molten injection waxes are Flammable at temperatures in excess of 350°F / 177°C.
Hot injection waxes can cause skin burns. Avoid contact with skin. Adequate eye protection and protective clothing is strongly recommended.
Characteristics:
- Color - Turquoise Blue
- Form - Flakes
- Flexibility - Medium
- Shrinkage – Minimal
- Injection Temperature - 150º F to 160º F (66º C to 71ºC
- Injection pressure – Low to 10PSI (0.70 kg/cm2)
- Self-Releasing Agent
Packaged in 1Lb Plastic Sealed Bag
For combined shipping and quantity discount, please feel free to contact us by email at info@jetsinc.com or toll free +1 (888)750-5387.
