Product Description
Free Shipping
A Universal Work Holder also known as the Peg Clamp that is mounted on a steel base. The bench peg clamp can be secured on the work bench. The peg Clamp has four movable pins that accommodate large and small items while work is done.
Work holder can be rotated and positioned in the desired angle for the work to be done. The 4 pins are used to hold item in position for engraving and repair.
Note: Four extra Pins are supplied along with an Allen key for tightening head segment along with 3 fastening screws.
The Clamp Work surface has multiple positioning holes that the 4-Pins can be positioned to hold part. The clamp opens by simply turning the knurled side screw head, with a maximum opening of 5/8" -15.82mm. The clamp opening segment has two guide pins to provide support.
Peg Clamp is made of Aluminum and is fastened to a 3" steel base with threaded screw. The Clamp is mounted with socket ball joints that can be easily positioned to the work angle. The work holder can be removed from the handle to use in a vise. (As Pictured).
Specifications:
- Overall Height: 4" - 100mm
- Head Diameter: 2" approx. / 1-31/32" / 49.9mm
- Work Holder Holes Depth: 33/128" / 6.46mm
- Work Holder Metal Pins Diameter: 0.118" /3mm
- Work Holder Metal Pins Length: 0.540" / 13.72mm
- Base Diameter: 3-1/2" - 90mm
For combined shipping and quantity discount, please feel free to contact us by email at info@jetsinc.com or toll free +1 (888)750-5387.
