Product Description
SET OF GASKETS 3" for PERFORATED FLASK
FOR VACUUM CASTING
SILICONE & GRAPHITE - GASKETS FOR 3" PERFORATED FLASKS
A set of 3" gaskets... High-grade silicone and graphite high-temperature gaskets.
Gaskets are used together to provide the best seal during vacuum casting to seal the perforated flask ring and casting chamber.
The Silicon acts as a sealing layer, while the graphite is placed on top of the silicone, protecting and prolonging the silicone seal from the high flask temperature.
The combination of the 2 types of gaskets provides a very good seal, allowing the vacuum to fully pull the molten metal into the flask.
These gaskets are die-cut, have a thickness of 1/8" for the Silicone and 1/16" for the Graphite.
Gaskets come in various diameters to work with individual flask OD sizes; visit our store.
SPECIFICATIONS: JETS Product #0304-230 + 15230
-Materials: Silicon & Graphite
-Flask Diameter: 3" - 76.3mm
-Outside Diameter: 4-1/2" - 114.3mm
-Inside Diameter: 3-3/8"- 85.7 mm
-Gasket Width: 9/16" - 14.3mm
-Thickness: Silicone -1/8" / Graphite 1/16"
Item is new, packaged - sandwiched in between cardboard to ensure safe shipping.
VERY Fragile SHOULD NOT BE BENT
Note: The Graphite gasket will last long and can be used as long as they are handled properly… avoiding cracking or breakage, they are subject to breakage.
