Dialux Polishing Rouge Polish Jewelry and Metals 6 Bars

Product Description

Free Shipping

DIALUX® Brand polishing compounds originally formulated in France has been a popular polishing compound for over 50 years.   The Dialux polishing compounds are a high grade premium polishing line of compounds specifically formulated for Precious Metals in Jewelry Polishing.  These are "Original" compounds not similar ones from CHINA.

DIALUX SET:  CUTTING - POLISHING & FINISHING COMPOUNDS

Bar size: 4" x 1" x 1-1/8"  - 100mm x 25mm x 30mm

Bar Weight: 120 Grams - 4 Oz

· RED "ROUGE DE PARIS"  -  Used for Super Finishing yellow color metals, especially Gold.

·  YELLOW "JAUNE"  -  Used for Bright Shine on Brass - Copper - Bronze - Soft Metals - Non ferrous Metals

·  BLUE "BLEU DE PARIS"  -  Used for High Shine on all metals

·  WHITE "BLANC" -  Used for Bright Polish on White Metals - Silver

·  GREEN "VERT"  -  Used for Polishing Silver & White Color metals

·  GRAY  "GRIS"  -  Used for Cutting & Semi-Polish for Stainless & Hard White Color metals

POLISHING RECOMMENDATIONS:

Our recommendations and suggestions on Buffing to obtain the best results possible:

       . Use the right compound for the metal that you are trying to polish

     It may be needed to go through 2 or 3 steps, in polishing to get the optimum result you are looking to achieve.

       . Make sure that the parts that are being polished are smooth and clean, use the appropriate abrasive to remove lines and scratches.

     .   Avoid using different compounds with the same buff, if you have to then make sure to clean and remove any hardened compound residue on the surface edge with a buff rake.

       . Segregate your buffs for the various metals, Gold, Silver, Brass … try not to use the same buff for all metals.  If you have to then make sure buffs are cleaned (dressed) with a buff rake.

      .  A clean buffing wheel edge is important.

      .  Allow the buff and compound to perform the work they were made and formulated for, excessive force or pressure will hurt the process

     .   Whenever you are working with Platinum never use a buff that was used for another type of metal.