Product Description
Free Shipping
3M™ Scratch Remover adapts the trusted technology and innovation found in the professional scratch repair products into a simple solution. It offers ease of application and is very economical to use. Our scratch removal product is an excellent choice for removing blemishes on cars, trucks, motorcycles and snowmobiles.
We formulated our scratch remover for cars for ease of use. It's a versatile product that may be applied by either and or machine. When applied by hand, it is easier to use than rubbing compound and doesn't require any tools.
Note: To determine if you should use the 3M quick scratch and scuff remover, run your fingernail over the scratch. If your fingernail does NOT catch, we recommend using this kit. If your fingernail catches on the scratch or if it is a very large area you may need to use the 3M Trizact Precision scratch kit or see a professional technician.
Specifications: JETS Inc. Product # 1614-839149
- One 3M Scratch Remover, 1 U.S. oz (29,5 mL)
- One pc Trizact Scratch Pad 2" x 2" (5cm x 5cm)
- All in a Sealed Pouch
Directions for Use:
1- Clean the surface of the area to be repaired with car wash soap and water.
2- Spray water on the repair area and the square Trizact Scratch Pad. Use the Trizact Scratch Pad to sand the immediate area of the scratch/scuff, no more than 2 inches out beyond the scratch/scuff. Sand with light. Medium pressure so that you see with slurry or foam appear.
3- Wipe the sanded area with a paper towel. If the scratch is still visible, continue sanding. The area will begin to look dull. The gloss will be restored in the next step.
4- Open the scratch remover packet and apply a quarter-sized amount to a clean microfiber cloth. Rub the repair area aggressively, with firm pressure, and blend lightly into the area out beyond the scratch remover and continue polishing until fine scratches are gone.
5- Give the repair area a final wipe with a clean detail cloth or fresh paper towel to remove all scratch remover. Extra material can be saved to remove more scratches and scuffs.
To Apply By Hand
- Apply to small areas, about one to two square feet.
- Dispense a quarter size drop of remover onto a clean, soft, microfiber cloth. Apply to the painted surface using a firm circular motion.
- Work the area using a firm, circular motion until the cleaner is dry.
- Remove remaining film using a 3M™ Microfiber Detailing Cloth (PN 39016)
To Apply By Machine
- Dispense enough material on the surface to work a one-foot by one-foot area.
- Buff area using an air or electric buffer equipped with a 3M Polishing Pad using light to medium pressure.
- Reduce pressure when product begins to dry.
- Remove remaining film using a 3M™ Microfiber Detailing Cloth (PN 39016)
