Silver Solder for Jewelry Making Assortment Pack Wire and Sheets - Soft - Medium - Hard, One Of each

SOFT  -  MEDIUM  -  HARD

Silver Solder Assortment pack for Jewelry Making and Repairs, set of 3 GRADES   - includes 1 each of Soft, Medium, and Hard.   

The assortment pack includes solder in the form of Wire and Sheet. 

The set allows a choice of solder type wire or sheet and grade to use for the particular application. 

Repairs: Lower-temperature solder is recommended for repair work, especially on pieces that may have been reworked, as high-temperature solder may cause problems.  

Assembly Work:  In multiple component soldering, use the highest temperature Solder first, then a medium grade, and finally to a soft the softest lower melting point.

Production:  High temperature solder, the Hard grade should be used, with the higher silver content, better match of color, and a stronger bond.

The Hard Solder allows for future repairs to be performed with the softer grade solders.

Attention: Solder is made to be used with a Torch, NOT with a soldering gun or iron. 

SOFT/EASY SPECIFICATIONS:
- Solder:  Silver Content of 65% 
- Melt temperature:  1,240°F - 671°C
- Flow temperature:  1,325°F  - 718°C
MEDIUM SPECIFICATIONS: 
- Solder:  Silver Content of 70% 
- Melt temperature:  1,275°F - 691°C                           
- Flow temperature:  1,360°F - 738°C                            
HARD SPECIFICATIONS: 
- Solder:  Silver Content of 75% 
- Melt temperature:  1,365°F - 741°C
- Flow temperature:  1,450°F - 788°C