Product Description
Free Shipping
Silver Solder for Jewelry Making and Repairs, set of 3 grades - includes 1 dwt (1.5g) each of Soft, Medium and Hard solder sheet (Each piece is about 1" square).
Soft Silver Solder Sheet, with a melting point of 1260o F - 682oC. with a Silver Content of 65%
Medium Silver Solder, medium grade flow with a melting point of 1295o F - 702oC. with a Silver Content of 70%
Hard Silver Solder Sheet, with a melting point of 1375o F - 746oC. with a Silver Content of 75%
NOTE: Cadmium FREE Solder
Technical Information:
Repairs: Lower temperature solder is recommended for repair work, especially on pieces that may have been reworked and a high temperature solder may cause a problem.
Assembly Work: In multiple component soldering use the Higher Temperature Solder first, then a medium grade and finally to a soft the lower melting point.
Production: High temperature solder, the hard grade should be used, with the higher silver content, better match of color and a stronger bond. Allowing future repairs to be performed with the softer solders.
Attention: These solders are made to be used with high heat torch or butane torch in order to reach melting temperature, it is not intended to be used with soldering iron.
