Formerly sold as “Tuffy Green Flakes” this is the toughest wax of the Freeman Flakes line. Tuf Guy Green characteristics is its accuracy and durability, yet flexible make it ideal for large pieces.
Injection Wax suited for: Rings, Charms, Pendants Buckles and large components.
This injection wax is highly fluid when melted for easy injection and release from molds. Consistently reproduce your molds with perfect results.
To obtain optimum results, you should "tweak" the wax temperature one degree at a time, bringing it down to the coolest injection temperature possible. Be sure to allow at least one hour soak time between tests to permit the wax to fully stabilize at the new temperature setting.
Always inject molds at the lowest possible pressure setting (typical injection pressures range from 2-10 PSI). This will eliminate or minimize flashing and mold lines, greatly reduce clean up time, and will ensure similar pieces are the same weight. Other savings include reduced metal loss and faster finishing.
Molten injection waxes are Flammable at temperatures in excess of 350°F. Hot injection waxes can cause skin burns. Avoid contact with skin.
- Color - Tuf Guy Green
- Form - Flakes
- Flexibility - High
- Shrinkage – Low
- Injection Temperature: 165º F - 73ºC
- Memory: Medium
- Readability: High
- Solidification Time: Medium
- Self-Releasing Agent
Packaged in 1 lb. Bag Plastic Sealed Bag.
For combined shipping and quantity discount, please feel free to contact us by email at email@example.com or toll free +1 (888)750-5387.