Product Description
Free Shipping
Arbor - Spindle is made in the U.S.A. manufactured with close tolerances, runs true without any vibration with optimal performance of wheels and accessories being used.
A 3/4" Arbor Hole Spindle is used to hold Wheels with 1/2" arbor holes: Abrasives, Drum Sanders, De-Burring, Buffs and Felt Wheels and more.
Arbor hole on this Spindle is a 3/4" to work on 3/4" diameter shaft Grinders - Motors. The arbor is made to be used on the RIGHT Side of the motor, with right hand threading, fastened and held on the motor shaft with 2 Allen Head Set Screws.
Note: Always slightly tighten the front most set screw and then the one closest to the motor. Final tightness should be done after both are equally tight.
Specifications:
- Material: Cold Rolled Steel
- Overall Length: 4-5/64" - 103.65mm
- Arbor Body Diameter: 1-1/8" - 28.57mm
- Spindle Body Length: 1-35/64" - 39.24mm
- Spindle 1/2" Shaft Length: 2-17/32" - 64.2mm
- Arbor Hole: 3/4" - 19.0mm for Shaft Connection
- Arbor Shaft Depth: 1-1/4" - 32.0mm
- Weight: 8.25z. - 234gr
Features:
- Precision Quality
- Machining is done by CNC Equipment
- Made of Steel and Anodized Black Finish
- Set of Allen Screw do not protrude above the main shaft of the spindle.
- Spindle comes with 2 Steel Machined Washers
- Right Hand 1/2" x 20 Nickel Plated Nu
- Quality Hardware (Washers and Screws)
Spindle is made to be used on a 3/4" shaft diameter and on the RIGHT Hand Side of Motor with forward direction.
