Product Description
Free Shipping
Arbor - Spindle is made in the U.S.A. manufactured with close tolerances, runs true without any vibration with optimal performance of wheels and accessories being used.
This Arbor - Spindle is used to hold Wheels with 1/2" arbor holes: Abrasives, Drum Sanders, De-Burring, Buffs and Felt Wheels and more.
Arbor hole on this Spindle is a 5/8" to work on 5/8" diameter shaft Grinders, Motors or Polishers. The arbor is made with threading to be used on the LEFT Side of the motor, fastened and held on the motor shaft with 2 Allen Head Set Screws.
Note: Always slightly tighten the front most set screw and then the one closest to the motor. Final tightness should be done after both are equally tight
Specifications:
- Material: Cold Rolled Steel
- Overall Length: 3-7/16" - 87.3mm
- Arbor Body Diameter: 1" - 25.3mm
- Spindle Body Length: 1-9/16" - 39.7mm
- Spindle Shaft Length: 1-7/8" - 47.65mm
- Arbor Hole: 5/8" - 15.87mm for Shaft Connection
- Spindle Shaft Diameter: 1/2" - 12.7mm
- Weight: 7.3oz. - 207gr
Features:
- Precision Quality
- Machining is done by CNC Equipment
- Made of Steel and Anodized Black Finish
- Set of Allen Screw do not protrude above the main shaft of the spindle.
- Spindle comes with 2 Steel Machined Washers
- Left Hand 1/2" x 20 Nut
- Quality Hardware (Washers and Screws)
>>> Spindle is made to be used on a 5/8" shaft diameter and on the LEFT Hand Side of Motor with forward direction.
